Phone docked on an NMT replacement lid fitted to a Stanley Quencher at a city office desk

How to mount a phone on a Stanley cup: swap the lid

Maybe you have a favorite Stanley cup sitting in the cabinet that you bought because the color matched your ride, your desk, or your favorite team—and meanwhile, your phone is always in your hand until you are scrambling for a cord to charge it at the last minute. Replace the original lid on a compatible Stanley cup with an NMT MagSafe mount for Stanley, fit your magnetic charger inside, and you bring the whole team together: your cup becomes a MagSafe phone dock for your desk, vehicle console, or counter.

With the mount fitted, there is no need to hold your phone because it is already facing you at a 45° angle while it charges—and when you do want to pick it up, an easy one-hand grab takes it off and it snaps right back onto the charger when you set it down. In a vehicle cupholder, your cup sets the phone's height. Check that it clears your controls and sightlines, and dock or adjust your phone while parked. Put the original drinking lid back on when you want to use the cup for drinks.

Choose your Stanley

Fit goes by the cup you own. Pick your Stanley on its mount page in our Stanley collection and we send the matching fit. Each mount is $39, in ten colors:

  • Stanley Quencher H2.0 FlowState 20 oz; Stanley Quencher H2.0 FlowState 30 oz; Stanley IceFlow 2.0 Flip Straw 20 oz
  • Stanley Quencher H2.0 FlowState 40 oz; Stanley Quencher H2.0 FlowState 64 oz; Stanley Quencher ProTour Flip Straw 40 oz
  • Stanley Everyday Tumbler 16 oz; Stanley Everyday Tumbler 20 oz

Not sure which cup you have? Choose your cup in the fit finder on our compatibility page, or email us and we'll confirm before you order.

Fit your magnetic charger

Your magnetic charger holds the phone. Connect it to power so your phone tops up automatically whenever it sits on the mount. The mount has no magnets or electronics of its own.

Use an Apple 25W MagSafe Charger or Samsung Qi2 25W Magnet Wireless Charger (EP-P2900). Your charger is required and sold separately.

Route the cable

The cable passes through the lid, wraps around the cable management underneath, and exits at the back. Extra cable sits in the lid's recess, leaving the dry cup open underneath to store keys, earbuds, or spare coins—which also adds extra weight in the base for an even more planted, solid feel with taller cups on a flat surface.

Dock and rotate your phone

Phones with built-in magnets attach directly, including most iPhone models from iPhone 12 onward and select Android phones with Qi2 magnets. Phones without built-in magnets need a magnetic MagSafe or Qi2 case. Your phone charges as fast as your charger and phone allow.

Quick check: place your phone on your charger. If it holds securely, it will work with our mount. You can also check our FAQ or contact us and we'll confirm compatibility before you order.

Turn your phone a full 360° between portrait and landscape. The viewing angle stays fixed at 45°, and lifting the phone off or snapping it back on is a quick one-hand motion.

Match your ride or your team with a second color

Every NMT mount comes in ten colors, and the Top Ring swaps in about a minute with the included hex key so you can build a two-tone combo that matches your cup, your interior, or your team. Try different color combinations on our 3D preview page.

Made to order in the USA

Made to order in the USA. Your mount ships in 3–5 business days. See shipping details and our 30-day satisfaction guarantee.

Find the mount for your Stanley.

New Modern Trends is independent and is not affiliated with, endorsed by, or sponsored by YETI, Stanley, Apple, or Samsung. We use their names to identify compatible products.

Back to blog